Theses/Dissertations from 1994
Feedback active noise control systems, Dipa Vijayan
The effect of pre-control on small lot size manufacturing, Michael J. Wayman
Artificial neural system architectures for image processing, Yuhan Xi
Using artificial neural network for image processing, Wei Zhang
Theses/Dissertations from 1993
A new method for tomographic reconstruction of 3-D medical images from serial cross sections using dynamic elastic interpolation, Daniel A. Asare
The adaptive noise and acoustic echo cancellation techniques for the hands-free cellular phone system, Holmes H.C. Chuang
Development of optimal polarization theory for radar target classification and identification, Brian L. Evans
The application of a classifier system with constant and variable genetic periods, David P. Harter
A generalized cost analysis system for manufacturing simulation, Rajagopalan Jayashankar
Narrowband active noise control and equalization algorithms, Minjiang Ji
Preliminary design and implementation of the APS global orbit feedback control system, Jeffrey A. Kirchman
Three-dimensional analysis of the high-power laser cutting process by using finite-element method, Li Li
On-line modeling and feedback compensation techniques for 3-D active noise control systems, Jian Luan
Computer simulation for study of contact force in slider-disk interface, Weizhen Lu
A symmetric crosstalk-resistant adaptive noise canceler and its application, Weimin Peng
An investigation of trade-off between the benefit of process improvements and the lost production time spent on the improvements, IIangovan Radhakrishnan
Design of simulation and experimental system implementing fuzzy logic in a programmable device, Darleen J. Stockley
Sliding-mode-aided fuzzy control system design, Kuo-tung Sun
A new approach to adaptive control using a modified observer, Jose L. Tong
Active noise control systems : secondary source arrangements, frequency shaping, and electroacoustic path modeling, Jianming Tsai
A domain based on-line simulation system for real-time decision making, Suresh Vasudevan
Exploring a new application of the technique of imaging and image processing in zoology, Dahao Wang
Theses/Dissertations from 1992
The development of self aligned via fill using the metal liftoff technique, James J. Bercaw
Design of the MRAC scheme with PID controllers for robotic manipulators, Vytautas Braziunas
Model reference adaptive control of the dc motor configured within a close loop velocity system, Darren P. Castle
A new algorithm and method for fast parallel adder, Cheng-Pei Chen
Adaptive signal processing and its application to Echo canellations in telecommunications, Jier Chen
Viewpoint invariant automated object recognition, Abhijeet Chitnis
Brittle failure of cold forming dies made of high strength steel, Kaushik Choudhuri
On-line modeling techniques for active noise control in the duct, Yann-Guang Chyan
Vibration analysis of a board used for printed circuits, Jorge A. Crovetto
Preparation of a complementary metal oxide semiconductor inverter using diffusion techniques, Jacqueline E. Diaz
Modeling a bolted joint used for circuit boards, Yin Fang
Three dimensional active noise control with integrated audio capabilities, Brian Michael Finn
Development of reducing resistance of thick film resistors by laser treatment, Daniel J. Giesecke
Design and implementation of a hands-free telephone for persons with disabilities, Dan Greenwood
Adaptive linearization for cooperative position control of robotic manipulators, Anteneh Haile
A comparative study of cumulative Sum charts and Bayesian process control, Zahari Jasmani
Mixed finite element analysis of composite laminated plates in bending, Deepak Joshi
An expert machining system for rotational parts, Anil Kumar
Development of a sensor to record structural displacements, Scott R. Lang
PID and adaptive controller design for nonlinear systems, Shi Lan
Scissor lift optimum design with finite element analysis, Na Liu
Sizing an automated storage and retrieval system, Elizabeth Miles
The development and analysis of an adaptive echo cancellation microphone system, Zhibing Pan
A study of the JPEG still image compression standard and its implementation on multi-DSP96002 processor based architectures, Srinath V. Ramaswamy
Separation of text from mixed text/graphic and description of graphics, Jianjun Sa
A new model reference adaptive control approach, Saleh A. Saleh
Frequency domain digital hearing aid, Steven Voepel
A numerical study of Newtonian and non-Newtonian fluids flow in rectangular ducts, Chia Wang
Discrete-time model reference adaptive controller design for robotic manipulators, Shiaw-Pyng Yang
Development of parallel path difference algorithm for active noise cancellation, Yong Yan
Design and implementation of a low pressure chemical vapor deposition system for polysilicon and silicon nitride, Jianwen Zhu
Development and analysis of delayed-X LMS algorithm for active periodic noise control, Shuihong Zhu
Theses/Dissertations from 1991
Adaptive techniques for active cancellation of periodic sounds, Afonso Barbosa
Identification of submil-defects on crystal blanks with digital image processing technique, Pei Chen
The quest to the minimum of overlapped local minima in the parameter spaces of the steepest descent MRAC robotic manipulator, Tan-Cheng Chou
Normality verfication and scale factor identification for automated visual inspection, Siang C. Chuang
A tribo-acoustic study in fretting wear of thin film coated materials, Hadi M.N. Hamid
Parametric identification by using Model Reference Adaptive System (MRAS), LuMin Greg Hsia
Accurate motion time prediction of robot point-to-point operations, Muthaiya Kandaswamy
Design of a multi-petri-net based flexible manufacturing cell control system, Saurjya Kanta Khandai
Job scheduling and vehicle control rules for flexible manufacturing systems, Guruprasad Krishnamurthy
A finite element method applied to steady-state, viscous, incompressible flow, S. M.J. Mohammadi-Vakil
A computational model for convective cooling processes in electronic components, Telmo Olivos
Modelling static deformation of an articulated open-chain manipulator, Samardh Onukuri
VLSI block (c[i]rcuit module) placement using a rectangular cluster approach, Emanuel G. Owoye
Warranty policies beneficial to both consumer and producer, Ba Pirojboot
Modifications of stress code for 2D thermo-elastic stress analysis, Parham Piroozan
On-line acquisition of link deformations for the robot of accuracy, Amit Shekhar
An optical DC motor controller design with self-regulation and input-output tracking in the load presence, Sei-Yu Tsai
Signal analysis and processing on high airflow meter design, Yüeh Wu
A parallel DSP-based architecture for a real-time multiple path acoustic echo cancellation, Yi Yuan
Theses/Dissertations from 1990
Stabilization of fast transversal filter and periodic noise-cancellation application, Liang Chen
Automated analysis of spring structure using image processing technique, Tsung-sheng Chen
Development of single element flow graph procedure and real-time simulation of a high-frequency, high-order, low-pass power filter, S. Ali A. Ghane-E
Smith Chart characterization of quartz plate resonators, Kenneth D. Hartman
A comparison of the productivity of union and nonunion workers in manufacturing, James M. Hickey
Cooperative position control system design for two robotic manipulators, Chʻang-hung Hu
Curriculum changes in grades 9 and 10 Illinois industrial education, 1978-1988, Ernie C. Johnson
The impact of off-the-job injuries, Mark G. Kugler
Monocular pose acquisition, Ke-Chung Lai
A parallel pipelined dataflow trigger processor, Che-leung Lee
Three novel adaptive noise-cancellation techniques, Hsun Lee
Reliability evaluation and prediction of a time division switching system, Kyu Ouk Lee
Velocity measurement using Laser Doppler anemometry, Min-hsiang Liu
Study of POLA : an image data compression algorithm, Jagannadh Malla
ALTPLAN : computer-aided process planning and cost estimation of components, Periasamy Manivannan
Software for course administration and management systems : SCAMS, Raymond L. Mast
Automated roundness inspection, Zhibing Pan
The design and simulation of parallel DSP architectures for adaptive and frequency domain image-processing applications, Manish S. Pradhan
Design of an autonomous object-oriented cell control system, Francisco Pulgar Vidal
A model for effective thermal conductivity in a sorbing composite matrix structure, Mohammad Khursheed Sarwar
Development of active noise-control systems, Javier Tapia
Effect of skew on torque ripple in variable reluctance motors, Rajeev Vyas
Using MAPLE for symbolic computations in robotics, Rongdong Wang
Fabrication of miniature quartz resonators utilizing photolithographic techniques, Gregg Westberg