Theses/Dissertations from 1995
Integrated full-duplex speaker-phone system with a subband adaptive noise canceler, Padma P. Mallela
Subband-based adaptive algorithms for acoustic echo cancellation, Sai C. Manapragada
Design and implementation of a hot filament chemical vapor deposition system for diamond films, Evan L. Morrison
An eigenvalue analysis of Timoshenko beam undergoing coupled elastic-rigid body motion, Yixin Pan
How management-style within a profit center affects employee job satisfaction, John G. Popidinski
Design of a composite off-road bicycle shock absorber, Theodore C. Powers
Application of harmonic shape functions in finite element modal analysis, Surampudi S. Ravi
Cellular manufacturing performance measurement based on cell characteristics, Aravindan Sankaramurthy
Adaptive algorithm for line and speech enhancement, Vikas Sharma
Performance evaluation of adaptive suppression schemes for asynchronous CDMA systems in frequency-selective multipath fading, Mehul L. Vora
Nonlinear adaptive velocity control on elastic multi-link manipulators, Lih-Chang Wung
Performing digital image processing on IBM PC compatibles, Lei Xia
Narrowland active noise control techniques, Ciguo Zhang
BER and MSE performance evaluation of adaptive interference suppression schemes in asynchronous CDMA systems, Liping Zhu
Theses/Dissertations from 1994
A finite element method applied in analysis of one- and two-dimensional discrete plane structures, Sarang Afzali
Fast convergence techniques for active noise control systems, Kavita Char
Development of an adaptive delay filter for active periodic noise control, Kai-Ming Chung
Development of a mobile robot using a rational design methodology, Aravind S.V. Durai
Structural edge-condition characteristics provided by locking retainer printed circuit-board card guides, Larry J. Herrig
The heat transfer and fluid flow of water and a polyacrylamide solution in a square duct, Lawrence William Holz
The analysis and real-time implementation of full-band and sub-band acoustic echo cancellers, Lan Hu
Design optimization of a scroll compressor, Niel S. Janamanchi
Error-path modeling technique for active transformer noise control system and residual noise shaping experiments, Xuhua Jiang
A JPEG code generator utility, Vyjayanthi V. Kodagi
Image sequence compression by motion estimation and compensation, Raj M. Kumar
Development of a novel subband based acoustic echo cancellation for teleconferencing, Jingyuan Liu
A numerical study of non-Newtonian laminar flow in rectangular ducts, Lei Liu
A comparative study of the two-sided Shewhart chart using runs tests and the two-sided Cumulative Sum chart using runs tests, Anshuman Mehrotra
The development of graphical and input state linearization techniques for the design of controllers for chaotic systems, William F. Nordlin
Design and implementation of an integrated teleconferencing system, Dinakar Sosale
Engineering tool development utilizing interactive multimedia, Thomas L. Valent
Feedback active noise control systems, Dipa Vijayan
The effect of pre-control on small lot size manufacturing, Michael J. Wayman
Artificial neural system architectures for image processing, Yuhan Xi
Using artificial neural network for image processing, Wei Zhang
Theses/Dissertations from 1993
A new method for tomographic reconstruction of 3-D medical images from serial cross sections using dynamic elastic interpolation, Daniel A. Asare
The adaptive noise and acoustic echo cancellation techniques for the hands-free cellular phone system, Holmes H.C. Chuang
Development of optimal polarization theory for radar target classification and identification, Brian L. Evans
The application of a classifier system with constant and variable genetic periods, David P. Harter
A generalized cost analysis system for manufacturing simulation, Rajagopalan Jayashankar
Narrowband active noise control and equalization algorithms, Minjiang Ji
Preliminary design and implementation of the APS global orbit feedback control system, Jeffrey A. Kirchman
Three-dimensional analysis of the high-power laser cutting process by using finite-element method, Li Li
On-line modeling and feedback compensation techniques for 3-D active noise control systems, Jian Luan
Computer simulation for study of contact force in slider-disk interface, Weizhen Lu
A symmetric crosstalk-resistant adaptive noise canceler and its application, Weimin Peng
An investigation of trade-off between the benefit of process improvements and the lost production time spent on the improvements, IIangovan Radhakrishnan
Design of simulation and experimental system implementing fuzzy logic in a programmable device, Darleen J. Stockley
Sliding-mode-aided fuzzy control system design, Kuo-tung Sun
A new approach to adaptive control using a modified observer, Jose L. Tong
Active noise control systems : secondary source arrangements, frequency shaping, and electroacoustic path modeling, Jianming Tsai
A domain based on-line simulation system for real-time decision making, Suresh Vasudevan
Exploring a new application of the technique of imaging and image processing in zoology, Dahao Wang
Theses/Dissertations from 1992
The development of self aligned via fill using the metal liftoff technique, James J. Bercaw
Design of the MRAC scheme with PID controllers for robotic manipulators, Vytautas Braziunas
Model reference adaptive control of the dc motor configured within a close loop velocity system, Darren P. Castle
A new algorithm and method for fast parallel adder, Cheng-Pei Chen
Adaptive signal processing and its application to Echo canellations in telecommunications, Jier Chen
Viewpoint invariant automated object recognition, Abhijeet Chitnis
Brittle failure of cold forming dies made of high strength steel, Kaushik Choudhuri
On-line modeling techniques for active noise control in the duct, Yann-Guang Chyan
Vibration analysis of a board used for printed circuits, Jorge A. Crovetto
Preparation of a complementary metal oxide semiconductor inverter using diffusion techniques, Jacqueline E. Diaz
Modeling a bolted joint used for circuit boards, Yin Fang
Three dimensional active noise control with integrated audio capabilities, Brian Michael Finn
Development of reducing resistance of thick film resistors by laser treatment, Daniel J. Giesecke
Design and implementation of a hands-free telephone for persons with disabilities, Dan Greenwood
Adaptive linearization for cooperative position control of robotic manipulators, Anteneh Haile
A comparative study of cumulative Sum charts and Bayesian process control, Zahari Jasmani
Mixed finite element analysis of composite laminated plates in bending, Deepak Joshi
An expert machining system for rotational parts, Anil Kumar
Development of a sensor to record structural displacements, Scott R. Lang
PID and adaptive controller design for nonlinear systems, Shi Lan
Scissor lift optimum design with finite element analysis, Na Liu
Sizing an automated storage and retrieval system, Elizabeth Miles
The development and analysis of an adaptive echo cancellation microphone system, Zhibing Pan
A study of the JPEG still image compression standard and its implementation on multi-DSP96002 processor based architectures, Srinath V. Ramaswamy
Separation of text from mixed text/graphic and description of graphics, Jianjun Sa
A new model reference adaptive control approach, Saleh A. Saleh
Frequency domain digital hearing aid, Steven Voepel
A numerical study of Newtonian and non-Newtonian fluids flow in rectangular ducts, Chia Wang
Discrete-time model reference adaptive controller design for robotic manipulators, Shiaw-Pyng Yang
Development of parallel path difference algorithm for active noise cancellation, Yong Yan
Design and implementation of a low pressure chemical vapor deposition system for polysilicon and silicon nitride, Jianwen Zhu
Development and analysis of delayed-X LMS algorithm for active periodic noise control, Shuihong Zhu
Theses/Dissertations from 1991
Adaptive techniques for active cancellation of periodic sounds, Afonso Barbosa
Identification of submil-defects on crystal blanks with digital image processing technique, Pei Chen
The quest to the minimum of overlapped local minima in the parameter spaces of the steepest descent MRAC robotic manipulator, Tan-Cheng Chou
Normality verfication and scale factor identification for automated visual inspection, Siang C. Chuang
A tribo-acoustic study in fretting wear of thin film coated materials, Hadi M.N. Hamid
Parametric identification by using Model Reference Adaptive System (MRAS), LuMin Greg Hsia
Accurate motion time prediction of robot point-to-point operations, Muthaiya Kandaswamy
Design of a multi-petri-net based flexible manufacturing cell control system, Saurjya Kanta Khandai
Job scheduling and vehicle control rules for flexible manufacturing systems, Guruprasad Krishnamurthy
A finite element method applied to steady-state, viscous, incompressible flow, S. M.J. Mohammadi-Vakil
A computational model for convective cooling processes in electronic components, Telmo Olivos
Modelling static deformation of an articulated open-chain manipulator, Samardh Onukuri
